HENGMEICopper Busbar & Surface Treatment中文
Home / Surface treatment
Surface treatment

Eight processes, one factory floor

Plating and coating decide whether a busbar joint survives 20 years or fails in two. We run tin, silver, nickel and zinc lines, dip coating, passivation, stainless electropolishing and aluminum anodizing in-house — each monitored in real time and verified in our plating laboratory.

Tin plating line

Tin Plating 5–10 μm

Rack-line tin plating for anti-oxidation and solderability. Thickness verified by XRF on every batch.

Silver plating line

Silver Plating

High-conductivity silver layer for busbar joints and high-current contacts; salt-spray tested.

Nickel plating production line

Nickel Plating

Barrier layer under tin or as final finish; uniform deposit monitored in real time.

Zinc plating line

Zinc & Barrel Zinc

Corrosion protection for steel stamped parts, with trivalent passivation options.

Stainless steel electropolishing line

Stainless Electropolishing

Electrolytic polishing for stainless brackets and enclosures — bright, passive, clean-room friendly.

Dip coating process

Dip Coating (Plastisol)

Insulating plastisol coating for busbar joints; custom colors and dielectric strength.

Automated plating line

Passivation

Chrome-free passivation to extend corrosion life of zinc and aluminum surfaces.

Industrial heat-shrink oven

Heat-Shrink Insulation

In-house industrial oven bakes heat-shrink tubing onto busbars — tight seal rated to 300°C stability.

Laboratory verification

XRF coating thickness analyzer TrueX COAT3

XRF Thickness (TrueX COAT3)

Measures single and multi-layer coatings incl. alloys — bench-top accuracy for every batch.

Salt spray test chamber

Salt Spray Chamber

Corrosion life data feeds back into plating process parameters.

Electroplating laboratory

Plating Chemistry Lab

Chemical composition analysis, surface quality and hardness testing.